Under The Hood | |
---|---|
Engine Make | Kawasaki |
Engine ignition | Switch |
Engine cylinders | 2 |
Engine cooling | Air |
Engine fuel | Gasoline (Unleaded, Regular) |
Fuel Tank Capacity (quarts) | 32 |
Fuel Tank Capacity (litres) | 30.28 |
Oli filter | |
Fan-cooled pumps | |
Battery | Lead-acid |
Battery voltage | 12 V |
Engine power Kw | 32.2 |
CARB compliant | Optional |
Horsepower | 24 HP |
Mowing Features | |
Cutting width (inches) | 54 |
Cutting methods | Side discharge |
Cutting deck material | Steel |
Deck thickness gauge | 11 |
Anti-scalp wheels | 3 |
Deck lifting system | Lift-lever operated |
Blade engagement | PTO clutch |
Blades | 3 |
Mower Cut Height (inches) | 5 |
Mower Cut Height Min (inches) | 1.5 |
Cut Height Increments count | 8 |
Cutting height adjustment | Notch (foot-operated) |
Lift system | Foot Operated, Spring Assisted |
Mower Deck Material | Steel |
Mower Drive System | Lever-operated (lap bar) |
Mower Wheels | 4 |
Mower Wheel Adjustment | Manual (adjustment nut) |
Spindle Bushings | 2 |
Drive Details | |
Steering type | Zero turn |
Turning Radius | 360 |
Interlock system | |
Drive system type | Lever-operated |
Wheel type | Pneumatic |
Front Wheel Diameter | 12 x 6-6 inches |
Rear Wheel Diameter | 20 x 10-8 inches |
Transmission Type | Hydrostatic |
Transmission manufacturer | Hydro-Gear |
Transmission model | ZT-800 |
Transmission control | Lever-operated |
Transmission cooling | Fan-cooled |
Other Specs & Features | |
MSRP | $5,849.95 |
Country of assembly | USA |
UPC code | 728172398328 |
12 Volt Outlet | |
Covered Toolbox | |
Cupholder | |
Hourmeter | |
Chassis frame | Welded steel |
Receiver Hitch | (front and rear) |
Starter type | Key start (electric) |
Fuel Tank Capacity | 8 gal. (Or 30.28L / 32 qts.) |
Manufacture product ID | ZTR2454KA |
AlphaMetrics | |
Width (inches) | 62 (Including Chute) |
Height (inches) | 40 |
Width (mm) | 1574.8 |
Height (mm) | 1016 |
General Specs | |
Main category | Zero-turn lawn mower |
Weight | 762lbs. |
Warranty | 3 years |
Description:
Set aside the typical 24hp motor for a 54-inch zero turn, this model comes with some features of a pro -- an 8mph top speed, two side-by-side 4-gallon fuel tanks, eight cutting height adjustments, three steel blades under an 11-gauge steel deck, and a 3-year warranty. It is also suited with a welded steel frame, composite fenders, and a protective wrap for its motor.
Also called Swisher 54-inch ZTR Kawasaki.